#Fl studio change root note mod#
#Fl studio change root note Patch#

Now we pan one clone all the way to the left, and the other to the right. Then go to the filter section on this one, and put cutoff at a quarter. On the second clone, change every Osc to square, this one will be a whole new texture. On the first clone, raise the cutoff slightly, this way we'll have more highs on this one. All this is doing is making the sound thicker and fatter by adding more textures. Then we are going to duplicate the synth so we have 3 copies of it. Change the root note of the synth to C7 so it gets to the right range. Then set the first Osc's CRS to half, and the second and third to -12.

#Fl studio change root note Patch#

We are going to start by loading our basic patch we made earlier.

This one is complicated, but if you follow along it should turn out okay, okay? Great. Layering for our Lovely Wobble Finally my favorite part. I turned it down in the signal chain, I like it at 50 to 25 percent (You edit the signal chain next to the slots that have the plug ins and effects, it's a little knob).Д¤. A little bit of chorus on the channel adds a lot of character. Here is where we make our Noisia type sound, and it is actually really, really easy. Making the Dirty Attack Bass This isn't the wobble, if you just want the wobble then skip ahead. We aren't going to use the post filter, we will do our own controlled filtering later. Turn the color and pre band to taste, I like mine really low. Crank the preamp all the way up, turn on x100 mode, and lower the post gain to half. Open up a Blood Overdrive (it's included with FL studio). You should have a growly type sound now, so we are going to add some serious dirt now. Our settings will be the deafault, but turn the mix to 3/4. Open a fruity fast distortion on the channel. Basic Processing of our Basic Patch Alright, so you got through the nasty filtering, congratulations! Now for the fun, distortion! :D First send the 3xosc to a mixer channel. Don't worry about the mids and highs, we'll get them back later.Дў. We will tweak this more later when we overdrive. Then set the resonance almost all the way up, at least 3/4 of the way.

#Fl studio change root note mod#

Set the Cutoff, or mod x, to 1/8th, so just below the quarter mark. Set the filter mode to LP x2 or SVF LP x2. The filtering by itself will sound horrible, but trust me on this, it's needed for when we overdrive the crap out of it. Now we head to the filter section in the instrument tab. Detune each osc a very, very small amount, not too much. Then set the first osc to saw, second to square, and third to triangle. First take all the oscillator's coarse tuning (CRS) all the way down. The Basic Patch I'll be making the basic sound in 3xosc, but you can use Sytrus if you want. If you don't have FL Studio you can apply the same concepts to your sounds, just using different names. There is an audio example of what we will be making in my track here: Д«ass starts at around 1:10, the wobble and the growly bass are both from the same patch. Anyway, the bass patches I'll be going through are made in FL Studio 9 with all included plug ins and no fancy synthesis. Skyhunter : Wed 27th Apr 2011 : 10 years ago